添加Ceph OSDs (RAW磁盘)

警告

我尝试通过默认集群名来避免 添加Ceph OSDs (zdata) 遇到的无法传递自定义集群名的问题，但是本次尝试依然失败(虽然也有一些经验积累)。所以我准备重新开始采用标准 添加Ceph OSDs (LVM卷) 部署，后续再准备虚拟机环境解决本文实践问题。`

在完成了初始 安装 ceph-mon 之后，就可以添加 OSDs。只有完成了足够的OSDs部署(满足对象数量，例如 osd pool default size =2 要求集群至少具备2个OSDs)才能达到 active + clean 状态。在完成了 bootstap Ceph monitor之后，集群就具备了一个默认的 CRUSH map，但是此时 CRUSH map还没有具备任何Ceph OSD Daemons map到一个Ceph节点。

Ceph提供了一个 ceph-vlume 工具，用来准备一个逻辑卷，磁盘或分区给Ceph使用，通过增加索引来创建OSD ID，并且将新的OSD添加到CRUSH map。需要在每个要添加OSD的节点上执行该工具。

备注

我有3个服务器节点提供存储，需要分别在这3个节点上部署OSD服务。

备注

Ceph官方文档的案例都是采用 ceph-volume lvm 来完成的，这个命令可以在Ceph的OSD底层构建一个 Linux LVM逻辑卷管理 ，带来的优势是可以随时扩容底层存储容量，对后续运维带来极大便利。在生产环境中部署，建议使用 lvm 卷。

我这里的测试环境，采用简化的 磁盘分区 来提供Ceph Ceph后端存储引擎BlueStore 存储，原因是我需要简化配置，同时我的测试服务器也没有硬件进行后续扩容。

bluestore

Ceph后端存储引擎BlueStore 是最新的Ceph采用的默认高性能存储引擎，底层不再使用OS的文件系统，可以直接管理磁盘硬件。

需要部署OSD的服务器首先准备存储，通常采用LVM卷作为底层存储块设备，这样可以通过LVM逻辑卷灵活调整块设备大小(有可能随着数据存储增长需要调整设备)。

作为我的实践环境 HPE ProLiant DL360 Gen9服务器 每个 Open Virtual Machine Firmware(OMVF) 虚拟机仅有一个pass-through PCIe NVMe存储，所以我没有划分不同存储设备来分别存放 block / block.db 和 block.wal 。并且也因为无法扩展存储，我就尝试不使用LVM卷，而直接采用磁盘分区。

使用raw分区作为bluestore底层(失败)

  • 执行 ceph-volume --help 可以看到支持3种底层存储:

    lvm                      Use LVM and LVM-based technologies to deploy OSDs
simple                   Manage already deployed OSDs with ceph-volume
raw                      Manage single-device OSDs on raw block devices

我这里构建实践采用 ceph-volume raw ，直接采用 NVMe 存储分区

备注

生产环境请使用LVM卷作为底层设备 - 参考 Ceph BlueStore配置

我的部署实践是在3台虚拟机 z-b-data-1 / z-b-data-2 / z-b-data-3 上完成，分区完全一致

  • 准备底层块设备，这里划分 GPT 分区1

    parted /dev/nvme0n1 mklabel gpt
parted -a optimal /dev/nvme0n1 mkpart primary 0% 700GB

完成后检查 fdisk -l 可以看到:

Disk /dev/nvme0n1: 953.89 GiB, 1024209543168 bytes, 2000409264 sectors
Disk model: SAMSUNG MZVL21T0HCLR-00B00
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E131A860-1EC8-4F34-8150-2A2C312176A1

Device         Start        End    Sectors   Size Type
/dev/nvme0n1p1  2048 1367187455 1367185408 651.9G Linux filesystem

备注

以上分区操作在3台存储虚拟机上完成

  • 创建第一个OSD，注意我使用了统一的 data 存储来存放所有数据，包括 block.db 和 block.wal

    sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1

备注

ceph-volume raw -h 包含子命令:

list                     list BlueStore OSDs on raw devices
prepare                  Format a raw device and associate it with a (BlueStore) OSD
activate                 Discover and prepare a data directory for a (BlueStore) OSD on a raw device

ceph-volume lvm -h 包含子命令:

activate                 Discover and mount the LVM device associated with an OSD ID and start the Ceph OSD
deactivate               Deactivate OSDs
batch                    Automatically size devices for multi-OSD provisioning with minimal interaction
prepare                  Format an LVM device and associate it with an OSD
create                   Create a new OSD from an LVM device
trigger                  systemd helper to activate an OSD
list                     list logical volumes and devices associated with Ceph
zap                      Removes all data and filesystems from a logical volume or partition.
migrate                  Migrate BlueFS data from to another LVM device
new-wal                  Allocate new WAL volume for OSD at specified Logical Volume
new-db                   Allocate new DB volume for OSD at specified Logical Volume

对于 raw 命令需要分步骤完成，不像 lvm 命令提供了更为丰富的批量命令

我在执行:

sudo ceph-volume raw prepare --data /dev/nvme0n1p1

命令提示只支持 --bluestore 作为后端，但是提示 /dev/nvme0n1p1: not a block device 让我很疑惑，NVMe分区为何不是块设备？:

stderr: lsblk: /dev/nvme0n1p1: not a block device
stderr: Unknown device "/dev/nvme0n1p1": Inappropriate ioctl for device
--> must specify --bluestore (currently the only supported backend)

修订命令，添加 --bluestore 参数:

sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1

备注

从 lsblk 输出来看 /dev/nvme0n1p1 没有显示为正常的块设备，原因我在下文会说明

# lsblk /dev/nvme0n1 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT nvme0n1 259:0 0 953.9G 0 disk └─nvme0n1p1 259:1 0 651.9G 0 part

# lsblk /dev/nvme0n1p1 lsblk: /dev/nvme0n1p1: not a block device

但是对于 vda 设备却没有报错:

# lsblk /dev/vda
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vda    252:0    0    6G  0 disk
├─vda1 252:1    0  243M  0 part /boot/efi
└─vda2 252:2    0  5.8G  0 part /

# lsblk /dev/vda2
NAME MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vda2 252:2    0  5.8G  0 part /

但是 ceph-volume raw prepare 报错:

ceph-volume raw 输出(错误)
 1 stderr: lsblk: /dev/nvme0n1p1: not a block device
 2 stderr: Unknown device "/dev/nvme0n1p1": Inappropriate ioctl for device
 3Running command: /usr/bin/ceph-authtool --gen-print-key
 4Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new c3334a8e-e118-44c5-bcce-709a268e7438
 5Running command: /usr/bin/ceph-authtool --gen-print-key
 6Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
 7--> Executable selinuxenabled not in PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin
 8Running command: /usr/bin/chown -R ceph:ceph /dev/nvme0n1p1
 9Running command: /usr/bin/ln -s /dev/nvme0n1p1 /var/lib/ceph/osd/ceph-0/block
10Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /var/lib/ceph/osd/ceph-0/activate.monmap
11 stderr: 2021-11-29T20:04:59.576+0800 7f906c775700 -1 auth: unable to find a keyring on /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,: (2) No such file or directory
12 stderr: 2021-11-29T20:04:59.576+0800 7f906c775700 -1 AuthRegistry(0x7f90640592a0) no keyring found at /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,, disabling cephx
13 stderr: got monmap epoch 2
14Running command: /usr/bin/ceph-authtool /var/lib/ceph/osd/ceph-0/keyring --create-keyring --name osd.0 --add-key AQDrwaRhxXsbCBAAfKmbWFW4HSZwWnXIccm/Xg==
15 stdout: creating /var/lib/ceph/osd/ceph-0/keyring
16added entity osd.0 auth(key=AQDrwaRhxXsbCBAAfKmbWFW4HSZwWnXIccm/Xg==)
17Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0/keyring
18Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0/
19Running command: /usr/bin/ceph-osd --cluster ceph --osd-objectstore bluestore --mkfs -i 0 --monmap /var/lib/ceph/osd/ceph-0/activate.monmap --keyfile - --osd-data /var/lib/ceph/osd/ceph-0/ --osd-uuid c3334a8e-e118-44c5-bcce-709a268e7438 --setuser ceph --setgroup ceph
20 stderr: 2021-11-29T20:05:00.680+0800 7fa1f4b0ad80 -1 bluestore(/var/lib/ceph/osd/ceph-0/) _read_fsid unparsable uuid
21 stderr: 2021-11-29T20:05:00.680+0800 7fa1f4b0ad80 -1 bdev(0x55c7dcfec000 /var/lib/ceph/osd/ceph-0//block) open open got: (22) Invalid argument
22 stderr: 2021-11-29T20:05:00.680+0800 7fa1f4b0ad80 -1 bluestore(/var/lib/ceph/osd/ceph-0/) mkfs failed, (22) Invalid argument
23 stderr: 2021-11-29T20:05:00.680+0800 7fa1f4b0ad80 -1 OSD::mkfs: ObjectStore::mkfs failed with error (22) Invalid argument
24 stderr: 2021-11-29T20:05:00.680+0800 7fa1f4b0ad80 -1  ** ERROR: error creating empty object store in /var/lib/ceph/osd/ceph-0/: (22) Invalid argument
25--> Was unable to complete a new OSD, will rollback changes
26Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring osd purge-new osd.0 --yes-i-really-mean-it
27 stderr: 2021-11-29T20:05:00.772+0800 7f953f72d700 -1 auth: unable to find a keyring on /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,: (2) No such file or directory
28 stderr: 2021-11-29T20:05:00.772+0800 7f953f72d700 -1 AuthRegistry(0x7f95380592a0) no keyring found at /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,, disabling cephx
29 stderr: purged osd.0
30-->  RuntimeError: Command failed with exit code 250: /usr/bin/ceph-osd --cluster ceph --osd-objectstore bluestore --mkfs -i 0 --monmap /var/lib/ceph/osd/ceph-0/activate.monmap --keyfile - --osd-data /var/lib/ceph/osd/ceph-0/ --osd-uuid c3334a8e-e118-44c5-bcce-709a268e7438 --setuser ceph --setgroup ceph

问题根源

实际我也发现即使采用 ceph-volume lvm create 也是失败的，提示信息中也有:

stderr: lsblk: /dev/nvme0n1p1: not a block device

我仔细检查了设备文件，发现了异常:

$ ls -lh /dev/nvme0n1
brw-rw---- 1 root disk 259, 0 Nov 29 20:19 /dev/nvme0n1

$ ls -lh /dev/nvme0n1p1
-rw-r--r-- 1 ceph ceph 10M Nov 29 17:00 /dev/nvme0n1p1

也就是说，设备分区 nvme0n1p1 异常，没有显示为块设备，我想起来之前做了一个 /usr/bin/dd if=/dev/zero of=/dev/nvme0n1p1 bs=1M count=10 conv=fsync 但当时没有注意到已经删除了分区 nvme0n1p1 所以导致 dd 命令直接作用于 /dev 目录下形成了上述文件。这就导致后续分区之后，实际上没有正确创建出 /dev/nvme0n1p1 块设备。

解决方法是重建分区表，并且重启一次操作系统:

parted /dev/nvme0n1 mklabel gpt
shutdown -r now

重启以后再划分分区:

parted -a optimal /dev/nvme0n1 mkpart primary 0% 700GB

完成以后再检查设备文件就可以看到是正常的块设备:

$ ls -lh /dev/nvme0*
crw------- 1 root root 241, 0 Nov 29 20:32 /dev/nvme0
brw-rw---- 1 root disk 259, 0 Nov 29 20:33 /dev/nvme0n1
brw-rw---- 1 root disk 259, 2 Nov 29 20:33 /dev/nvme0n1p1

然后重新执行创建OSD磁盘成功:

ceph-volume raw 输出(成功)
 1Running command: /usr/bin/ceph-authtool --gen-print-key
 2Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new 8d889fc0-110c-45fa-a259-6a876183bc46
 3Running command: /usr/bin/ceph-authtool --gen-print-key
 4Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
 5--> Executable selinuxenabled not in PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin
 6Running command: /usr/bin/chown -R ceph:ceph /dev/nvme0n1p1
 7Running command: /usr/bin/ln -s /dev/nvme0n1p1 /var/lib/ceph/osd/ceph-0/block
 8Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /var/lib/ceph/osd/ceph-0/activate.monmap
 9 stderr: 2021-11-29T20:40:23.416+0800 7f2f3e3c7700 -1 auth: unable to find a keyring on /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,: (2) No such file or directory
102021-11-29T20:40:23.416+0800 7f2f3e3c7700 -1 AuthRegistry(0x7f2f380592a0) no keyring found at /etc/ceph/ceph.client.bootstrap-osd.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,, disabling cephx
11 stderr: got monmap epoch 2
12Running command: /usr/bin/ceph-authtool /var/lib/ceph/osd/ceph-0/keyring --create-keyring --name osd.0 --add-key AQA2yqRhes0wORAAttpUh5aRZsr1pLdHeXRezg==
13 stdout: creating /var/lib/ceph/osd/ceph-0/keyring
14added entity osd.0 auth(key=AQA2yqRhes0wORAAttpUh5aRZsr1pLdHeXRezg==)
15Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0/keyring
16Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0/
17Running command: /usr/bin/ceph-osd --cluster ceph --osd-objectstore bluestore --mkfs -i 0 --monmap /var/lib/ceph/osd/ceph-0/activate.monmap --keyfile - --osd-data /var/lib/ceph/osd/ceph-0/ --osd-uuid 8d889fc0-110c-45fa-a259-6a876183bc46 --setuser ceph --setgroup ceph
18 stderr: 2021-11-29T20:40:23.876+0800 7fc9a125dd80 -1 bluestore(/var/lib/ceph/osd/ceph-0/) _read_fsid unparsable uuid
19 stderr: 2021-11-29T20:40:23.940+0800 7fc9a125dd80 -1 freelist read_size_meta_from_db missing size meta in DB
20--> ceph-volume raw clear prepare successful for: /dev/nvme0n1p1

  • 检查raw设备:

    sudo ceph-volume raw list

可以看到设备文件如下:

{
    "0": {
        "ceph_fsid": "39392603-fe09-4441-acce-1eb22b1391e1",
        "device": "/dev/nvme0n1p1",
        "osd_id": 0,
        "osd_uuid": "8d889fc0-110c-45fa-a259-6a876183bc46",
        "type": "bluestore"
    }
}

  • 激活OSD: 需要注意 raw 格式的设备激活和 lvm卷不同，采用如下格式:

    ceph-volume raw activate [--device DEVICE]

也就是只要指定设备就可以:

sudo ceph-volume raw activate --device /dev/nvme0n1p1

提示报错:

--> systemd support not yet implemented

  • 这是因为需要先启动systemd:

    sudo systemctl start ceph-osd@0.service

然后检查:

sudo systemctl status ceph-osd@0.service

显示输出:

● ceph-osd@0.service - Ceph object storage daemon osd.0
     Loaded: loaded (/lib/systemd/system/ceph-osd@.service; disabled; vendor preset: enabled)
     Active: active (running) since Mon 2021-11-29 22:44:37 CST; 17s ago
    Process: 1370 ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} --id 0 (code=exited, status=0/SUCCESS)
   Main PID: 1382 (ceph-osd)
      Tasks: 69
     Memory: 25.0M
     CGroup: /system.slice/system-ceph\x2dosd.slice/ceph-osd@0.service
             └─1382 /usr/bin/ceph-osd -f --cluster ceph --id 0 --setuser ceph --setgroup ceph

Nov 29 22:44:37 z-b-data-1 systemd[1]: Starting Ceph object storage daemon osd.0...
Nov 29 22:44:37 z-b-data-1 systemd[1]: Started Ceph object storage daemon osd.0.
Nov 29 22:44:37 z-b-data-1 ceph-osd[1382]: 2021-11-29T22:44:37.656+0800 7f081f44ad80 -1 Falling back to public interface
Nov 29 22:44:38 z-b-data-1 ceph-osd[1382]: 2021-11-29T22:44:38.332+0800 7f081f44ad80 -1 osd.0 0 log_to_monitors {default=true}
Nov 29 22:44:40 z-b-data-1 ceph-osd[1382]: 2021-11-29T22:44:40.308+0800 7f0811535700 -1 osd.0 0 waiting for initial osdmap
Nov 29 22:44:40 z-b-data-1 ceph-osd[1382]: 2021-11-29T22:44:40.336+0800 7f081898c700 -1 osd.0 13 set_numa_affinity unable to identify public interface '' numa node: (2) No such file or directory

这里可以看到 ceph-osd 启动会找寻 NUMA 节点

没有报错的话，别忘记激活这个osd服务:

sudo systemctl enable ceph-osd@0.service

  • 然后再次激活 ceph-0 这个OSD磁盘:

    sudo ceph-volume raw activate --device /dev/nvme0n1p1

依然报错:

--> systemd support not yet implemented

似乎不需要手工激活，只需要启动 ceph-osd@0.service 就可以

  • 现在检查 sudo ceph -s 状态已经看到激活了OSD:

    cluster:
  id:     39392603-fe09-4441-acce-1eb22b1391e1
  health: HEALTH_WARN
          Reduced data availability: 1 pg inactive
          Degraded data redundancy: 1 pg undersized
          OSD count 1 < osd_pool_default_size 3
services:
  mon: 1 daemons, quorum z-b-data-1 (age 2h)
  mgr: z-b-data-1(active, since 2h)
  osd: 1 osds: 1 up (since 16m), 1 in (since 16m)
data:
  pools:   1 pools, 1 pgs
  objects: 0 objects, 0 B
  usage:   1.0 GiB used, 651 GiB / 652 GiB avail
  pgs:     100.000% pgs not active
           1 undersized+peered

备注

注意，此时可以看到 data 段落显示:

usage:   1.0 GiB used, 651 GiB / 652 GiB avail

  • 检查OSD状态:

    sudo ceph osd tree

可以看到:

ID  CLASS  WEIGHT   TYPE NAME            STATUS  REWEIGHT  PRI-AFF
-1         0.63660  root default
-3         0.63660      host z-b-data-1
 0    ssd  0.63660          osd.0            up   1.00000  1.00000

请注意，现在只有一个OSD运行，不满足配置中要求3个副本的要求，我们需要添加OSD节点

重启操作系统验证

重启操作系统 sudo shutdown -r now

  • 启动后检查:

    sudo ceph -s

发现服务启动，但是OSD空间是0:

cluster:
  id:     39392603-fe09-4441-acce-1eb22b1391e1
  health: HEALTH_WARN
          Reduced data availability: 1 pg inactive
          OSD count 1 < osd_pool_default_size 3
services:
  mon: 1 daemons, quorum z-b-data-1 (age 4m)
  mgr: z-b-data-1(active, since 3m)
  osd: 1 osds: 1 up (since 45m), 1 in (since 45m)
data:
  pools:   1 pools, 1 pgs
  objects: 0 objects, 0 B
  usage:   0 B used, 0 B / 0 B avail
  pgs:     100.000% pgs unknown
          1 unknown

也即是 OSD没有启动成功

重新激活OSD

为何重启系统之前已经配置成功的OSD无法启动呢？

  • 检查OSD服务:

    sudo systemctl status ceph-osd@0-service

输出显示:

● ceph-osd@0-service.service - Ceph object storage daemon osd.0-service
     Loaded: loaded (/lib/systemd/system/ceph-osd@.service; disabled; vendor preset: enabled)
     Active: inactive (dead)

  • 尝试启动 OSD服务:

    sudo systemctl start ceph-osd@0.service

提示失败:

Job for ceph-osd@0.service failed because the control process exited with error code.
See "systemctl status ceph-osd@0.service" and "journalctl -xe" for details.

检查 systemctl status ceph-osd@0.service

● ceph-osd@0.service - Ceph object storage daemon osd.0
     Loaded: loaded (/lib/systemd/system/ceph-osd@.service; enabled; vendor preset: enabled)
     Active: failed (Result: exit-code) since Mon 2021-11-29 23:26:58 CST; 24min ago
    Process: 968 ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} --id 0 (code=exited, status=0/SUCCESS)
    Process: 983 ExecStart=/usr/bin/ceph-osd -f --cluster ${CLUSTER} --id 0 --setuser ceph --setgroup ceph (code=exited, status=1/FAILURE)
   Main PID: 983 (code=exited, status=1/FAILURE)

Nov 29 23:26:58 z-b-data-1 systemd[1]: Failed to start Ceph object storage daemon osd.0.
Nov 29 23:35:32 z-b-data-1 systemd[1]: ceph-osd@0.service: Start request repeated too quickly.
Nov 29 23:35:32 z-b-data-1 systemd[1]: ceph-osd@0.service: Failed with result 'exit-code'.
Nov 29 23:35:32 z-b-data-1 systemd[1]: Failed to start Ceph object storage daemon osd.0.
Nov 29 23:36:06 z-b-data-1 systemd[1]: ceph-osd@0.service: Start request repeated too quickly.
Nov 29 23:36:06 z-b-data-1 systemd[1]: ceph-osd@0.service: Failed with result 'exit-code'.
Nov 29 23:36:06 z-b-data-1 systemd[1]: Failed to start Ceph object storage daemon osd.0.
Nov 29 23:50:17 z-b-data-1 systemd[1]: ceph-osd@0.service: Start request repeated too quickly.
Nov 29 23:50:17 z-b-data-1 systemd[1]: ceph-osd@0.service: Failed with result 'exit-code'.
Nov 29 23:50:17 z-b-data-1 systemd[1]: Failed to start Ceph object storage daemon osd.0.

  • 查看 inventory 输出:

    ceph-volume inventory

可以看到:

Device Path               Size         rotates available Model name
/dev/nvme0n1              953.87 GB    False   True      SAMSUNG MZVL21T0HCLR-00B00
/dev/vda                  6.00 GB      True    False

检查详情输出:

ceph-volume inventory /dev/nvme0n1

可以看到报告:

====== Device report /dev/nvme0n1 ======

     path                      /dev/nvme0n1
     lsm data                  {}
     available                 True
     rejected reasons
     device id                 SAMSUNG MZVL21T0HCLR-00B00_S676NF0R908202
     removable                 0
     ro                        0
     vendor
     model                     SAMSUNG MZVL21T0HCLR-00B00
     sas address
     rotational                0
     scheduler mode            none
     human readable size       953.87 GB

  • 检查分区:

    ceph-volume inventory /dev/nvme0n1p1

输出显示 inventory 这个分区被拒绝，原因是已经具备了BlueStore设备标签:

====== Device report /dev/nvme0n1p1 ======

     path                      /dev/nvme0n1p1
     lsm data                  {}
     available                 False
     rejected reasons          Has BlueStore device label
     device id                 SAMSUNG MZVL21T0HCLR-00B00_S676NF0R908202
     human readable size       651.92 GB

  • 我发现 /var/lib/ceph/osd/ceph-0/ 目录完全是空的，之前的 sudo ceph-volume raw prepare --data /dev/nvme0n1p1 执行完成后，这个目录已经具备了初始化的内容，为何重启之后就丢失了呢？

参考 ceph systmed帮助 可以看到， systemd 在启动时候，会检查 /etc/ceph/osd/{id}-{uuid}.json 配置文件加载相对应的systemd unit的实例名称，然后根据对应的卷使用 OSD 目标转换处理挂载，也就是 /var/lib/ceph/osd/{cluster name}-{osd id} 挂载，即 /var/lib/ceph/osd/ceph-0 (第一个OSD)。一旦进程处理完毕，就会调用启动OSD，即 systemctl start ceph-osd@0 。

我检查发现我的服务器上没有 /etc/ceph/osd/ 目录，也就是说我之前的步骤动态激活了 OSD，但是没有创建 json 格式的配置文件，导致再次启动时 systemd 无法读取配置来尊卑实例以及对应目录挂载，所以也就无法启动OSD。

  • 可以从 sudo ceph-volume raw list 获得json格式设备文件，输出到对应配置文件 /etc/ceph/osd/0-8d889fc0-110c-45fa-a259-6a876183bc46.json

    {
    "0": {
        "ceph_fsid": "39392603-fe09-4441-acce-1eb22b1391e1",
        "device": "/dev/nvme0n1p1",
        "osd_id": 0,
        "osd_uuid": "8d889fc0-110c-45fa-a259-6a876183bc46",
        "type": "bluestore"
    }
}

从文档看 ceph-volume simple activate 可以激活已经构建过的OSD，所以我尝试:

ceph-volume simple activate {ID} {FSID}

或:

ceph-volume simple activate --file /etc/ceph/osd/{ID}-{FSID}.json

按照帮助提示，首先 scan

sudo ceph-volume simple scan

然后执行激活:

ceph-volume simple activate --all

这里提示错误，显示确实根据 --all 参数去激活所有 *.json 文件，但是:

--> activating OSD specified in /etc/ceph/osd/0-8d889fc0-110c-45fa-a259-6a876183bc46.json
--> Required devices (block and data) not present for bluestore
--> bluestore devices found: []
-->  AttributeError: 'RuntimeError' object has no attribute 'message'

  • 检查详情:

    ceph health detail

显示输出:

HEALTH_WARN 1 osds down; 1 host (1 osds) down; 1 root (1 osds) down; Reduced data availability: 1 pg inactive; OSD count 1 < osd_pool_default_size 3
[WRN] OSD_DOWN: 1 osds down
    osd.0 (root=default,host=z-b-data-1) is down
[WRN] OSD_HOST_DOWN: 1 host (1 osds) down
    host z-b-data-1 (root=default) (1 osds) is down
[WRN] OSD_ROOT_DOWN: 1 root (1 osds) down
    root default (1 osds) is down
[WRN] PG_AVAILABILITY: Reduced data availability: 1 pg inactive
    pg 1.0 is stuck inactive for 3h, current state unknown, last acting []
[WRN] TOO_FEW_OSDS: OSD count 1 < osd_pool_default_size 3

  • 检查 osd

    ceph osd tree

显示状态down:

ID  CLASS  WEIGHT   TYPE NAME            STATUS  REWEIGHT  PRI-AFF
-1         0.63660  root default
-3         0.63660      host z-b-data-1
 0    ssd  0.63660          osd.0          down   1.00000  1.00000

  • 我检查了之前 sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1 输出记录，发现其中有将设备文件设置为 ceph 用户的步骤:

    /usr/bin/chown -R ceph:ceph /dev/nvme0n1p1

但是我发现服务器重启之后，这个设备文件恢复回root用户:

brw-rw---- 1 root disk 259, 1 Nov 30 16:05 /dev/nvme0n1p1

我重试 udev 设置正确的ownership，但是重启系统依然没有正确启动OSD。

重新开始

由于解决不了问题，我参考 Adding/Removing OSDs 删除掉osd，然后重新开始:

sudo ceph osd stop 0
sudo ceph osd purge 0 --yes-i-really-mean-it

此时:

sudo ceph osd tree

显示:

ID  CLASS  WEIGHT  TYPE NAME            STATUS  REWEIGHT  PRI-AFF
-1              0  root default
-3              0      host z-b-data-1

已经没有了 osd.0

  • 重新创建OSD:

    sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1

但是非常奇怪的报错:

...
Running command: /usr/bin/ceph-osd --cluster ceph --osd-objectstore bluestore --mkfs -i 0 --monmap /var/lib/ceph/osd/ceph-0/activate.monmap --keyfile - --osd-data /var/lib/ceph/osd/ceph-0/ --osd-uuid e4725c90-9f08-45fd-b063-5807cc84e992 --setuser ceph --setgroup ceph
stderr: 2021-11-30T17:57:15.364+0800 7f0464d78d80 -1 bluestore(/var/lib/ceph/osd/ceph-0/) _open_fsid (2) No such file or directory
stderr: 2021-11-30T17:57:15.364+0800 7f0464d78d80 -1 bluestore(/var/lib/ceph/osd/ceph-0/) mkfs fsck found fatal error: (2) No such file or directory
stderr: 2021-11-30T17:57:15.364+0800 7f0464d78d80 -1 OSD::mkfs: ObjectStore::mkfs failed with error (2) No such file or directory
stderr: 2021-11-30T17:57:15.364+0800 7f0464d78d80 -1  ** ERROR: error creating empty object store in /var/lib/ceph/osd/ceph-0/: (2) No such file or directory
--> Was unable to complete a new OSD, will rollback changes
...

似乎是因为没有清理么？

  • 增加一个清理分区前10M空间的命令:

    sudo /usr/bin/dd if=/dev/zero of=/dev/nvme0n1p1 bs=1M count=10 conv=fsync

果然，重启系统后再次尝试创建OSD就能够正常完成:

sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1

  • 完成后检查 /var/lib/ceph/osd/ceph-0/ 可以看到以下内容:

    total 48K
-rw-r--r-- 1 ceph ceph 206 Nov 30 20:42 activate.monmap
lrwxrwxrwx 1 ceph ceph  14 Nov 30 20:42 block -> /dev/nvme0n1p1
-rw------- 1 ceph ceph   2 Nov 30 20:42 bluefs
-rw------- 1 ceph ceph  37 Nov 30 20:42 ceph_fsid
-rw-r--r-- 1 ceph ceph  37 Nov 30 20:42 fsid
-rw------- 1 ceph ceph  56 Nov 30 20:42 keyring
-rw------- 1 ceph ceph   8 Nov 30 20:42 kv_backend
-rw------- 1 ceph ceph  21 Nov 30 20:42 magic
-rw------- 1 ceph ceph   4 Nov 30 20:42 mkfs_done
-rw------- 1 ceph ceph  41 Nov 30 20:42 osd_key
-rw------- 1 ceph ceph   6 Nov 30 20:42 ready
-rw------- 1 ceph ceph  10 Nov 30 20:42 type
-rw------- 1 ceph ceph   2 Nov 30 20:42 whoami

并且这个 /var/lib/ceph/osd/ceph-0 已经挂载成 tmpfs ，通过 df -h 检查可以看到:

tmpfs           7.9G   48K  7.9G   1% /var/lib/ceph/osd/ceph-0

  • 注意此时只是完成磁盘初始化，尚未激活，所以:

    sudo ceph -s

看到如下输出:

cluster:
  id:     39392603-fe09-4441-acce-1eb22b1391e1
  health: HEALTH_WARN
          Reduced data availability: 1 pg inactive
          OSD count 1 < osd_pool_default_size 3

services:
  mon: 1 daemons, quorum z-b-data-1 (age 5m)
  mgr: z-b-data-1(active, since 4m)
  osd: 1 osds: 0 up (since 20h), 0 in (since 3h)

data:
  pools:   1 pools, 1 pgs
  objects: 0 objects, 0 B
  usage:   0 B used, 0 B / 0 B avail
  pgs:     100.000% pgs unknown
           1 unknown

  • 检查设备文件:

    sudo ceph-volume raw list

显示:

{
    "0": {
        "ceph_fsid": "39392603-fe09-4441-acce-1eb22b1391e1",
        "device": "/dev/nvme0n1p1",
        "osd_id": 0,
        "osd_uuid": "4f6f2db9-894a-455c-bdaf-f3324ab5efe1",
        "type": "bluestore"
    }
}

注意重新格式化之后 osd_uuid 是变化的

  • 激活磁盘:

    sudo ceph-volume raw activate --device /dev/nvme0n1p1

此时提示:

--> systemd support not yet implemented

  • 启动 systemd 的 ceph-osd@0.service 服务:

    sudo systemctl enable ceph-osd@0.service
sudo systemctl start ceph-osd@0.service

  • 检查服务状态:

    sudo systemctl status ceph-osd@0.service

状态如下:

● ceph-osd@0.service - Ceph object storage daemon osd.0
     Loaded: loaded (/lib/systemd/system/ceph-osd@.service; disabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-11-30 20:52:51 CST; 5s ago
    Process: 1390 ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} --id 0 (code=exited, status=0/SUCCESS)
   Main PID: 1403 (ceph-osd)
      Tasks: 69
     Memory: 26.3M
     CGroup: /system.slice/system-ceph\x2dosd.slice/ceph-osd@0.service
             └─1403 /usr/bin/ceph-osd -f --cluster ceph --id 0 --setuser ceph --setgroup ceph

Nov 30 20:52:51 z-b-data-1 systemd[1]: Starting Ceph object storage daemon osd.0...
Nov 30 20:52:51 z-b-data-1 systemd[1]: Started Ceph object storage daemon osd.0.
Nov 30 20:52:51 z-b-data-1 ceph-osd[1403]: 2021-11-30T20:52:51.712+0800 7f7ea0ba8d80 -1 Falling back to public interface
Nov 30 20:52:52 z-b-data-1 ceph-osd[1403]: 2021-11-30T20:52:52.392+0800 7f7ea0ba8d80 -1 osd.0 0 log_to_monitors {default=true}
Nov 30 20:52:53 z-b-data-1 ceph-osd[1403]: 2021-11-30T20:52:53.840+0800 7f7e92c93700 -1 osd.0 0 waiting for initial osdmap
Nov 30 20:52:53 z-b-data-1 ceph-osd[1403]: 2021-11-30T20:52:53.896+0800 7f7e9a0ea700 -1 osd.0 111 set_numa_affinity unable to identify public interface '' numa node: (2) No such file or directory

  • 按照 ceph systmed帮助 文档，可以知道只要已经完成磁盘挂载，则启动 ceph-osd@0.service 就会激活磁盘(应该不需要手工 ceph-volume raw active )。此时检查集群状态可以看到第一个OSD已经激活启用:

    sudo ceph -s

输出显示:

cluster:
  id:     39392603-fe09-4441-acce-1eb22b1391e1
  health: HEALTH_WARN
          Reduced data availability: 1 pg inactive
          OSD count 1 < osd_pool_default_size 3

services:
  mon: 1 daemons, quorum z-b-data-1 (age 13m)
  mgr: z-b-data-1(active, since 13m)
  osd: 1 osds: 1 up (since 83s), 1 in (since 83s)

data:
  pools:   1 pools, 1 pgs
  objects: 0 objects, 0 B
  usage:   1.0 GiB used, 651 GiB / 652 GiB avail
  pgs:     100.000% pgs unknown
           1 unknown

  • 激活系统启动时启动 ceph-osd

    sudo systemctl enable ceph-osd@0.service

  • (这步应该不需要)参考 OSD Config Reference 最小化的配置，在 /etc/ceph/ceph.conf 添加OSD Daemon配置:

    [osd.0]
host = z-b-data-1

备注

在 /etc/ceph/ceph.conf 中添加 osd.0 配置可能是非常关键的一步，我第二次执行操作多增加了这步，然后重启服务器就能够正常启动所有服务，包括OSD也能正常启动

然后 重启操作系统 验证:

sudo ceph -s

如我所料，这次重启操作系统后，可以看到已经正常激活OSD:

cluster:
  id:     39392603-fe09-4441-acce-1eb22b1391e1
  health: HEALTH_WARN
          Reduced data availability: 1 pg inactive
          OSD count 1 < osd_pool_default_size 3

services:
  mon: 1 daemons, quorum z-b-data-1 (age 4m)
  mgr: z-b-data-1(active, since 4m)
  osd: 1 osds: 1 up (since 29m), 1 in (since 29m)

data:
  pools:   1 pools, 1 pgs
  objects: 0 objects, 0 B
  usage:   0 B used, 0 B / 0 B avail
  pgs:     100.000% pgs unknown
           1 unknown

但是，发现 systemctl status ceph-osd@0 是失败的:

● ceph-osd@0.service - Ceph object storage daemon osd.0
     Loaded: loaded (/lib/systemd/system/ceph-osd@.service; enabled; vendor preset: enabled)
     Active: failed (Result: exit-code) since Tue 2021-11-30 21:18:06 CST; 4min 2s ago
    Process: 966 ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} --id 0 (code=exited, status=0/SUCCESS)
    Process: 987 ExecStart=/usr/bin/ceph-osd -f --cluster ${CLUSTER} --id 0 --setuser ceph --setgroup ceph (code=exited, status=1/FAILURE)
   Main PID: 987 (code=exited, status=1/FAILURE)

Nov 30 21:18:06 z-b-data-1 systemd[1]: ceph-osd@0.service: Scheduled restart job, restart counter is at 3.
Nov 30 21:18:06 z-b-data-1 systemd[1]: Stopped Ceph object storage daemon osd.0.
Nov 30 21:18:06 z-b-data-1 systemd[1]: ceph-osd@0.service: Start request repeated too quickly.
Nov 30 21:18:06 z-b-data-1 systemd[1]: ceph-osd@0.service: Failed with result 'exit-code'.
Nov 30 21:18:06 z-b-data-1 systemd[1]: Failed to start Ceph object storage daemon osd.0.

我发现一个奇怪的问题，就是虽然 ceph -s 显示OSD已经激活，但实际上系统中根本没有 ceph-osd 进程，在 /var/run/ceph 目录下也没有osd对应的socket。这说明 osd 实际没有启动。但是 ceph -s 始终显示 osd 是正常up

sudo ceph osd tree

输出:

ID  CLASS  WEIGHT   TYPE NAME            STATUS  REWEIGHT  PRI-AFF
-1         0.63660  root default
-3         0.63660      host z-b-data-1
 0    ssd  0.63660          osd.0            up   1.00000  1.00000

从监控页面显示也是 OSDs : 1 total: 1 up, 1 in

但是显然 systemctl status ceph-osd@0.service 状态表明启动失败:

Process: 983 ExecStart=/usr/bin/ceph-osd -f --cluster ${CLUSTER} --id 0 --setuser ceph --setgroup ceph (code=exited, status=1/FAILURE)

  • 手工执行:

    sudo /usr/bin/ceph-osd -f --cluster ceph --id 0 --setuser ceph --setgroup ceph

可以看到错误原因:

2021-11-30T22:59:37.828+0800 7f60db9f3d80 -1 auth: unable to find a keyring on /var/lib/ceph/osd/ceph-0/keyring: (2) No such file or directory
2021-11-30T22:59:37.828+0800 7f60db9f3d80 -1 AuthRegistry(0x557f7fe96938) no keyring found at /var/lib/ceph/osd/ceph-0/keyring, disabling cephx
2021-11-30T22:59:37.832+0800 7f60db9f3d80 -1 auth: unable to find a keyring on /var/lib/ceph/osd/ceph-0/keyring: (2) No such file or directory
2021-11-30T22:59:37.832+0800 7f60db9f3d80 -1 AuthRegistry(0x7fff676473f0) no keyring found at /var/lib/ceph/osd/ceph-0/keyring, disabling cephx
failed to fetch mon config (--no-mon-config to skip)

但是手工创建文件也不能解决( ceph-volume raw prepare 过程命令):

/usr/bin/ceph-authtool /var/lib/ceph/osd/ceph-0/keyring --create-keyring --name osd.0 --add-key AQA2yqRhes0wORAAttpUh5aRZsr1pLdHeXRezg==
/usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0/keyring
/usr/bin/ln -s /dev/nvme0n1p1 /var/lib/ceph/osd/ceph-0/block

这个问题困扰了我两天，为何 ceph-volume raw prepare 命令的子命令有:

/usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0

那么 /var/lib/ceph/osd/ceph-0 岂不是一个内存中的存储，一旦重启数据就会丢失？ keyring 等文件在tmpfs中，是如何重启后继续存在的？

how the files in /var/lib/ceph/osd/ceph-0 are generated 讨论提到:

bluestore will save all the information at the starting of
disk (BDEV_LABEL_BLOCK_SIZE=4096)
this area is used for saving labels, including keyring, whoami etc.

通过以下命令检查:

ceph-bluestore-tool  show-label --path /var/lib/ceph/osd/ceph-0

可以看到:

{
    "/var/lib/ceph/osd/ceph-0/block": {
        "osd_uuid": "d34a6c89-0c53-4378-ac43-108b47722abf",
        "size": 699998928896,
        "btime": "2021-11-30T23:35:24.910469+0800",
        "description": "main",
        "bfm_blocks": "170898176",
        "bfm_blocks_per_key": "128",
        "bfm_bytes_per_block": "4096",
        "bfm_size": "699998928896",
        "bluefs": "1",
        "ceph_fsid": "39392603-fe09-4441-acce-1eb22b1391e1",
        "kv_backend": "rocksdb",
        "magic": "ceph osd volume v026",
        "mkfs_done": "yes",
        "osd_key": "AQC8RKZhuuYFCRAAAFhRXTyApcLIIsi1bZUxdA==",
        "ready": "ready",
        "require_osd_release": "15",
        "whoami": "0"
    }
}

当挂载 /var/lib/ceph/osd/ceph-0 时，ceph会dump这些内容到tmpfs目录。

根据之前 ceph-volume raw activate 可以看到 /var/lib/ceph/osd/ceph-0 挂载了 tmpfs 并获得了所有必须的 keyring 等文件，然后才能正确 systemctl start ceph-osd@0.service 。也就是说，能够正常启动 ceph-osd 进程的前提条件是 /var/lib/ceph/osd/ceph-0 目录正确挂载( activate )。操作系统重启，没有正确挂载和准备好这个目录，是导致无法启动 ceph-osd 的原因，那么是在哪里完成这个启动挂载配置呢？

应该有一个 /etc/ceph/osd/xxxx.json 配置提供了ceph启动时准备好目录挂载，这样就能正确启动 ceph-osd@0.service ...

how the files in /var/lib/ceph/osd/ceph-0 are generated 讨论，有人回答了这个准备 osd 目录的工具命令是 ceph-bluestore-tool prime-osd-dir ，可以重新创建所有的文件正确指向OSD block设备，所以我执行以下命令:

sudo ceph-bluestore-tool prime-osd-dir --dev /dev/nvme0n1p1 --path /var/lib/ceph/osd/ceph-0

但是，上述命令只传递了部分文件:

total 24K
-rw------- 1 root root 37 Dec  1 10:07 ceph_fsid
-rw------- 1 root root 37 Dec  1 10:07 fsid
-rw------- 1 root root 55 Dec  1 10:07 keyring
-rw------- 1 root root  6 Dec  1 10:07 ready
-rw------- 1 root root 10 Dec  1 10:07 type
-rw------- 1 root root  2 Dec  1 10:07 whoami

完成后检查就可以看到 sudo ls -lh /var/lib/ceph/osd/ceph-0 终于出现了正确挂载 /var/lib/ceph/osd/ceph-0 的 tmpfs 文件:

total 52K
-rw-r--r-- 1 ceph ceph 206 Nov 30 23:35 activate.monmap
lrwxrwxrwx 1 ceph ceph  14 Nov 30 23:35 block -> /dev/nvme0n1p1
-rw------- 1 ceph ceph   2 Nov 30 23:35 bluefs
-rw------- 1 ceph ceph  37 Dec  1 08:47 ceph_fsid
-rw-r--r-- 1 ceph ceph  37 Dec  1 08:47 fsid
-rw------- 1 ceph ceph  55 Dec  1 08:47 keyring
-rw------- 1 ceph ceph   8 Nov 30 23:35 kv_backend
-rw------- 1 ceph ceph  21 Nov 30 23:35 magic
-rw------- 1 ceph ceph   4 Nov 30 23:35 mkfs_done
-rw------- 1 ceph ceph  41 Nov 30 23:35 osd_key
-rw------- 1 ceph ceph   6 Dec  1 08:47 ready
-rw------- 1 ceph ceph   3 Nov 30 23:40 require_osd_release
-rw------- 1 ceph ceph  10 Dec  1 08:47 type
-rw------- 1 ceph ceph   2 Dec  1 08:47 whoami

  • 此时就能够正确启动 ceph-osd@0.service 服务:

    sudo systemctl start ceph-osd@0.service

备注

完整 activate BlueStore的过程见文档 ceph-volume » activate

总结

  • 删除掉OSD.0 准备重新开始:

    sudo ceph osd purge 0 --yes-i-really-mean-it

  • 清理理分区前10M空间(重要，否则 ceph-volume raw prepare 失败:

    /usr/bin/dd if=/dev/zero of=/dev/nvme0n1p1 bs=1M count=10 conv=fsync

  • 使用 raw 模式其实只有2个命令步骤:

    sudo ceph-volume raw prepare --bluestore --data /dev/nvme0n1p1
sudo ceph-volume raw activate --device /dev/nvme0n1p1

此时 /var/lib/ceph/osd/ceph-0 会挂载 tmpfs 正确生成指向 /dev/nvme0n1p1 BlueStore的文件，具备了启动 ceph-osd 的条件

  • 启动 ceph-osd 服务:

    sudo systemctl start ceph-osd@0.service
sudo systemctl enable ceph-osd@0.service

  • 此时检查 sudo ceph -s 就可以看到OSD 0已经激活启用

  • 检查 ceph-volume 输出的 osd_id 和 osd_uuid

    sudo ceph-volume raw list

显示:

{
    "0": {
        "ceph_fsid": "39392603-fe09-4441-acce-1eb22b1391e1",
        "device": "/dev/nvme0n1p1",
        "osd_id": 0,
        "osd_uuid": "d34a6c89-0c53-4378-ac43-108b47722abf",
        "type": "bluestore"
    }
}

  • 激活对应的卷服务(似乎应该有这个步骤，但是还是没有成功):

    sudo systemctl enable ceph-volume@raw-0-d34a6c89-0c53-4378-ac43-108b47722abf

输出提示:

Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@raw-0-d34a6c89-0c53-4378-ac43-108b47722abf.service → /lib/systemd/system/ceph-volume@.service.

这样启动才能够挂载好卷 不过我重启还是没有解决挂载

  • 如果不能正确挂载，则手工处理:

    mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
sudo ceph-bluestore-tool prime-osd-dir --dev /dev/nvme0n1p1 --path /var/lib/ceph/osd/ceph-0

这里进展了一步，生成了一些必要文件，但还不完整，所以 ceph-osd@0.service 还不能正常运行

  • 检查分区uuid(这个步骤待参考，是为了解决块设备属主，有可能不需要):

    udevadm info --query=all --name=/dev/nvme0n1p1 | grep -i uuid

将输出的 E: ID_PART_ENTRY_UUID 修订 /etc/udev/rules.d/99-perm.rules

ACTION=="add|change", ENV{ID_PART_ENTRY_UUID}=="4a7db7a7-90fc-47cb-b473-8774db0c392f", OWNER="ceph", GROUP="ceph"

  • 修订 /etc/ceph/ceph.conf 配置文件添加最简化的OSD配置(可能不需要):

    [osd.0]
host = z-b-data-1

这个配置可以确保操作系统重启后自动启动 osd.0

添加OSD

需要满足3副本要求，我们需要在服务器本地或者其他服务器上添加OSD。为了能够冗余，我采用集群3个服务器上每个服务器都启动 ceph-mon 和 ceph-osd ，所以下面我们来完成:

然后再执行:

参考